Comparative 3D study of dental arches in children with microcephaly associated with congenital Zika syndrome, orofacial cleft, and without craniofacial anomalies.

INTRODUCTION: The dentist participates in the treatment protocol for craniofacial anomalies in individuals from the first months of life. OBJECTIVE: to compare in a retrospective cohort study the morphometry of the edentulous palate of children microcephaly associated with congenital Zika syndrome (CZS), unilateral complete cleft lip and alveolus (UCL), and without craniofacial anomalies. METHODS: Forty-five digitized dental molds composed the sample divided into three groups: CZS; UCL; and without craniofacial anomalies (control group). The following measurements were evaluated: intercanine and intertuberosity distances; dental arch length, area, volume, and mismatch superimposition. Parametric and non-parametric tests were applied (α = 5%). RESULTS: CZS group showed the smallest means of intercanine distance and area than those of the other groups (p = .001 and p = .010, respectively). The dental arch length was greater in the CZS group than in the control group (p = .020). The evaluation of the mismatch superimposition showed that the CZS group had the lowest means of maximum distance and root mean square than that of the UCL group (p = .025 and p = .005, respectively). CONCLUSION: CZS participants tended to palatal narrowing, while UCL individuals had parameters similar to those of the control group, despite the alveolus defect.

Analysis of salivary parameters of mucopolysaccharidosis individuals.

Mucopolysaccharidosis (MPS) is a heterogeneous group of rare, chronic, progressive and systemic inherited disorders resulting from deficiency or lack of lysosomal enzymes responsible for the degradation of glycosaminoglycans. Products of nitrosative stress have been previously detected in blood and urine samples of patients with MPS. However, it is unclear whether they are present in the saliva of MPS patients and also if they correlate with salivary parameters such as flow and pH. This study compared the salivary levels of NOX (NO2- + NO3-), nitrite (NO2-), protein (albumin), erythrocyte and leukocyte numbers, as well as the salivary flow rate and pH values of samples obtained from 10 MPS patients and 10 healthy subjects. MPS patients exhibited higher salivary levels of NOX and NO2- when compared to healthy subjects (p < 0.05). Albumin was only detected in six saliva samples of MPS patients and, erythrocytes and leukocytes were detected in 60% and 40% of the MPS patients, respectively. In addition, salivary flow rate and pH averages were statistically lower in this group when compared to healthy samples (p < 0.05). Overall, the data indicates that the salivary levels of NO products can be used in combination with other heath indicators to monitor MPS disorders.

Analysis of salivary parameters of mucopolysaccharidosis individuals

Abstract Mucopolysaccharidosis (MPS) is a heterogeneous group of rare, chronic, progressive and systemic inherited disorders resulting from deficiency or lack of lysosomal enzymes responsible for the degradation of glycosaminoglycans. Products of nitrosative stress have been previously detected in blood and urine samples of patients with MPS. However, it is unclear whether they are present in the saliva of MPS patients and also if they correlate with salivary parameters such as flow and pH. This study compared the salivary levels of NOX (NO2- + NO3-), nitrite (NO2-), protein (albumin), erythrocyte and leukocyte numbers, as well as the salivary flow rate and pH values of samples obtained from 10 MPS patients and 10 healthy subjects. MPS patients exhibited higher salivary levels of NOX and NO2- when compared to healthy subjects (p < 0.05). Albumin was only detected in six saliva samples of MPS patients and, erythrocytes and leukocytes were detected in 60% and 40% of the MPS patients, respectively. In addition, salivary flow rate and pH averages were statistically lower in this group when compared to healthy samples (p < 0.05). Overall, the data indicates that the salivary levels of NO products can be used in combination with other heath indicators to monitor MPS disorders.

Flexural Strength of an Indirect Composite Modified with Single-Wall Carbon Nanotubes.

OBJECTIVES: The low resistance to fracture has limited the use of indirect composite resins for dental restorations, particularly in regions that are exposed to strong occlusal forces. To overcome this issue, different types of reinforcement for composites have been proposed, one of which is carbon nanotubes (CNTs). The aim of this study was to evaluate the flexural resistance of one commercial indirect composite resin (Sinfony, 3M/ESPE) after incorporation of single-wall carbon nanotubes (SWCNTs; Sigma-Aldrich, Inc., St. Louis, Missouri, United States) with or without the silanization form. MATERIALS AND METHODS: Specimens of composite resin were fabricated in a Teflon mold. The composite resin was prepared according to the manufacturer's instructions (n = 10 for each group), with SWCNTs in three concentrations. STATISTICAL ANALYSIS: The SWCNTs and SWCNT/SiO2-ATES specimens were evaluated by transmission electron microscopy, and a flexural test was conducted according to the ISO 4049/2009. Flexural strength data in MPa were submitted to one-way ANOVA following Tukey (p < 0.05). RESULTS: The SWCNTs did not improve the flexural strength of indirect composite resin when compared with the control, independent of the concentration added (p > 0.05). However, when SWCNTs and SWCNTs/SiO2-ATES were compared, the SWCNTs/SiO2-ATES showed higher values than the three concentrations of SWCNTs (p < 0.05). CONCLUSION: The silanization process improves the SWCNTs strength proprieties, but the modification of chemical bonding between SWCNT and SWCNT/SiO2-ATES modified resins, in different concentrations, did not improve the composite resin flexural strength.

Saliva as a tool for monitoring hemodialysis: a systematic review and meta-analysis

Abstract This study aimed to assess whether the reductions in serum urea and creatinine levels are different from the reductions in salivary urea and creatinine levels that occur after hemodialysis in chronic renal patients. The systematic review protocol was registered in the PROSPERO database. Eight databases were searched to identify pretest-posttest studies of chronic kidney disease patients undergoing hemodialysis, with no language or year restrictions. The JBI Critical Appraisal Tool was used to assess the risk of bias. Meta-analyses using random-effect models were conducted to compare salivary and serum correlations and to pooled mean and proportion differences from pre- to posthemodialysis urea and creatinine levels by subgroup analysis. The I2 test was used to assess heterogeneity, and a meta-regression was performed to statistically assess correlations and differences in the pooled effects pre- and postdialysis. The Grading of Recommendation, Assessment, Development, and Evaluation (GRADE) was used to assess the certainty of evidence. The search resulted in 1404 records, and only six studies (n = 252 participants) fulfilled the eligibility criteria and were included. The studies were published between 2013 and 2018. All studies showed a significant reduction in both salivary and serum urea/creatinine levels. All eligible studies presented a low risk of bias. The meta-analysis shows a moderate to high correlation between salivary and blood levels of urea (r: 0.79; 95% CI: 0.56-1.00) and creatinine (r: 0.64; 95%CI: 0.16-1.00), with a very low level of certainty. The reductions in salivary urea and creatinine levels are similar to and correlated with the reductions in blood urea and creatine levels after hemodialysis among chronic kidney disease patients.

Saliva as a tool for monitoring hemodialysis: a systematic review and meta-analysis.

This study aimed to assess whether the reductions in serum urea and creatinine levels are different from the reductions in salivary urea and creatinine levels that occur after hemodialysis in chronic renal patients. The systematic review protocol was registered in the PROSPERO database. Eight databases were searched to identify pretest-posttest studies of chronic kidney disease patients undergoing hemodialysis, with no language or year restrictions. The JBI Critical Appraisal Tool was used to assess the risk of bias. Meta-analyses using random-effect models were conducted to compare salivary and serum correlations and to pooled mean and proportion differences from pre- to posthemodialysis urea and creatinine levels by subgroup analysis. The I2 test was used to assess heterogeneity, and a meta-regression was performed to statistically assess correlations and differences in the pooled effects pre- and postdialysis. The Grading of Recommendation, Assessment, Development, and Evaluation (GRADE) was used to assess the certainty of evidence. The search resulted in 1404 records, and only six studies (n = 252 participants) fulfilled the eligibility criteria and were included. The studies were published between 2013 and 2018. All studies showed a significant reduction in both salivary and serum urea/creatinine levels. All eligible studies presented a low risk of bias. The meta-analysis shows a moderate to high correlation between salivary and blood levels of urea (r: 0.79; 95% CI: 0.56-1.00) and creatinine (r: 0.64; 95%CI: 0.16-1.00), with a very low level of certainty. The reductions in salivary urea and creatinine levels are similar to and correlated with the reductions in blood urea and creatine levels after hemodialysis among chronic kidney disease patients.

Alternative Method for Full Oral Rehabilitation in Patients with Pycnodysostosis Syndrome: A Case Report.

Pycnodysostosis (PYCD) is a rare autosomal recessive skeletal dysplasia arising from a change in the production of the cathepsin K enzyme and it is also known as Maroteaux-Lamy Syndrome. The main changes in the buccal and maxillofacial region are modifications of the facial bones (leading to the loss of the mandibular angle due to micrognathia), deep palate, premature and/or delayed tooth eruption, hypopneumatization of the maxillary sinuses, chin hypoplasia, hypercementosis, enamel hypoplasia, hyperdontia, incomplete dentin calcification, root hypoplasia, pulp chamber obliteration, and increased free functional space. This paper aims to report a case of a patient with PYCD, in which are highlighted the oral manifestations of this syndrome and present an option of oral rehabilitative treatment through a removable overdenture made on natural tooth of the patient. The technique of dental coating through overdenture is a simple, viable and conservative alternative for oral rehabilitation of patients with large maxillomandibular discrepancies, as in cases of pycnodysostosis, especially in the presence of increased free space - characteristic of patients with this syndrome. The result was quite satisfactory both aesthetically and functionally and provided a better life quality for the patient.

Virulence properties and sensitivity profile of Candida parapsilosis complex species and Kodamaea ohmeri isolates from onychomycosis of HIV/AIDS patients.

Cutaneous fungal infections include onychomycosis, an infection of the nail that affects both healthy and immunocompromised patients. This study investigated the in vitro hydrolytic enzymes production, adhesion and biofilm formation capacity of Candida parapsilosis complex species and Kodamaea ohmeri isolates from onychomycoses of HIV/AIDS patients and also established the antifungal sensitivity profiles of these isolates. Onychomycosis in HIV/AIDS patients showed a high prevalence of emerging yeasts, among which C. parapsilosis complex species and K. ohmeri were the most frequent. Three C. parapsilosis sensu stricto and two C. orthopsilosis isolates were resistant to amphotericin B and 83% of isolates were resistant to terbinafine. All three different species evaluated were proteinase and hemolysin producers. All isolates adhered to stainless steel and siliconized latex surfaces, and carbohydrates intensified adhesion of all isolates. Isolates adhered to keratinous nail and 50% formed biofilms with strong intensity. In multispecies or polymicrobial biofilms, C. albicans and Staphylococcus aureus regulated the biofilm formation of the analyzed species, decreasing the number of their cells in biofilms. The isolation of emerging yeast species from onychomycosis which are great producers of hydrolytic enzymes and with high adhesion and biofilm formation capacity is a result that should be considered relevant in clinical practice. In addition, half of the isolates was resistant to at least one of the tested antifungals. Taken together these data corroborate the infectious capacity and viability of these isolates under favorable conditions.

Revealing the Amylase Interactome in Whole Saliva Using Proteomic Approaches.

Understanding proteins present in saliva and their function when isolated is not enough to describe their real role in the mouth. Due to protein-protein interactions, structural changes may occur in macromolecules leading to functional modulation or modification. Besides amylase's function in carbohydrate breakdown, amylase can delay proteolytic degradation of protein partners (e.g., histatin 1) when complexed. Due to its biochemical characteristics and high abundance in saliva, amylase probably interacts with several proteins acting as a biological carrier. This study focused on identifying interactions between amylase and other proteins found in whole saliva (WS) using proteomic approaches. Affinity chromatography was used, followed by gel electrophoresis methods, sodium dodecyl sulfate and native, tryptic in-solution and in-gel digestion, and mass spectrometry. We identified 66 proteins that interact with amylase in WS. Characterization of the identified proteins suggests that acidic (pI < 6.8) and low molecular weight (MW < 56 kDa) proteins have preference during amylase complex formation. Most of the identified proteins present biological functions related to host protection. A new protein-amylase network was constructed using the STRING database. Further studies are necessary to investigate individualities of the identified amylase interactors. These observations open avenues for more comprehensive studies on not yet fully characterized biological function of amylase.

Acquired Enamel Pellicle Engineered Peptides: Effects on Hydroxyapatite Crystal Growth.

The aim of this study was to test the hypothesis that duplication/hybridization of functional domains of naturally occurring pellicle peptides amplified the inhibitory effect of hydroxyapatite crystal growth, which is related to enamel remineralization and dental calculus formation. Histatin 3, statherin, their functional domains (RR14 and DR9), and engineered peptides (DR9-DR9 and DR9-RR14) were tested at seven different concentrations to evaluate the effect on hydroxyapatite crystal growth inhibition. A microplate colorimetric assay was used to quantify hydroxyapatite crystal growth. The half-maximal inhibitory concentration (IC50) was determined for each group. ANOVA and Student-Newman-Keuls pairwise comparisons were used to compare the groups. DR9-DR9 increased the inhibitory effect of hydroxyapatite crystal growth compared to single DR9 (p < 0.05), indicating that functional domain multiplication represented a strong protein evolution pathway. Interestingly, the hybrid peptide DR9-RR14 had an intermediate inhibitory effect compared to DR9 and DR9-DR9. This study used an engineered peptide approach to investigate a potential evolution protein pathway related to duplication/hybridization of acquired enamel pellicle's natural peptide constituents, contributing to the development of synthetic peptides for therapeutic use against dental caries and periodontal disease.

Merging in-silico and in vitro salivary protein complex partners using the STRING database: A tutorial.

Protein-protein interaction is a common physiological mechanism for protection and actions of proteins in an organism. The identification and characterization of protein-protein interactions in different organisms is necessary to better understand their physiology and to determine their efficacy. In a previous in vitro study using mass spectrometry, we identified 43 proteins that interact with histatin 1. Six previously documented interactors were confirmed and 37 novel partners were identified. In this tutorial, we aimed to demonstrate the usefulness of the STRING database for studying protein-protein interactions. We used an in-silico approach along with the STRING database (http://string-db.org/) and successfully performed a fast simulation of a novel constructed histatin 1 protein-protein network, including both the previously known and the predicted interactors, along with our newly identified interactors. Our study highlights the advantages and importance of applying bioinformatics tools to merge in-silico tactics with experimental in vitro findings for rapid advancement of our knowledge about protein-protein interactions. Our findings also indicate that bioinformatics tools such as the STRING protein network database can help predict potential interactions between proteins and thus serve as a guide for future steps in our exploration of the Human Interactome. SIGNIFICANCE: Our study highlights the usefulness of the STRING protein database for studying protein-protein interactions. The STRING database can collect and integrate data about known and predicted protein-protein associations from many organisms, including both direct (physical) and indirect (functional) interactions, in an easy-to-use interface.

Effect of mechanical toothbrushing combined with different denture cleansers in reducing the viability of a multispecies biofilm on acrylic resins.

PURPOSE: To investigate the efficacy of immersion and brushing with different cleansing agents in reducing the viability of multispecies biofilm on acrylic resins. METHODS: Lucitone 550 (L) and Tokuyama Rebase Fast II (T) specimens (10 x 2 mm) were prepared, sterilized, and inoculated with a suspension of Candida albicans, Candida glabrata, and Streptococcus mutans. Specimens were incubated for 48 hours at 37 degrees C for biofilm formation. Then, they were divided into groups (n = 12) and subjected to brushing or immersion for 10 seconds in distilled water (W), 0.2% peracetic acid-Sterilife (Ac), 1% chlorhexidine digluconate (CHX), 1:1 water/dentifrice solution (D), 1% sodiumhypochlorite (NaOCl), and sodium perborate/Corega Tabs (Pb). Viable microorganisms were evaluated by the XTT assay and colony counts (cfu/mL). Data were performed by ANOVA and Tukey test with 5% significance level. RESULTS: The multispecies biofilm on L and T were killed by brushing or immersion in Ac, CHX, and NaOCl for only 10 seconds.

Zika virus infection spread through saliva--a truth or myth?

In this Point-of-view article we highlighted some features related to saliva and virus infection, in special for zika virus. In addition, we pointed out the potential oral problems caused by a microcephaly originated by a zika virus infection. In the end the, we demonstrated the importance of a more comprehensive exploration of saliva and their components as a fluid for diagnostic and therapeutic approaches on oral and systemic diseases.

Identification of acid-resistant proteins in acquired enamel pellicle.

OBJECTIVES: This study characterized the proteome profile of the acquired pellicle formed in vivo on enamel. Changes in this proteome profile after exposure to lactic or citric acid were also evaluated. METHODS: Volunteers (n=8) were subjected to dental prophylaxis. After 2 h to allow the formation of the acquired pellicle, the teeth were isolated with cotton rolls and 1 mL of citric acid (1%, pH 2.5) or lactic acid (0.1 M pH 4.8) or deionized water was gently applied with a pipette on the anterior teeth (both maxillary and mandibular) for 10 s. In sequence, the pellicle was collected with an electrode filter paper soaked in 3% citric acid. This procedure was repeated for two additional days following a crossover protocol. Proteins were subjected to reverse phase liquid chromatography coupled to mass spectrometry (nLC-ESI-MS/MS). MS/MS data were processed and submitted to Proteome Discoverer software. Searches were done using SWISS-PROT and TrEMBL databases for human proteins. RESULTS: In total, seventy-two proteins were present in all groups and were submitted to quantitative analysis (SIEVE). Some of these proteins were increased more than two-fold after exposure to the acids. Among them, cystatin-B was increased 20- and 13-fold after exposure to citric and lactic acids, respectively. Additionally, some proteins were identified in only one of the groups (18, 5, and 11 proteins for deionized water, citric and lactic acids, respectively). CONCLUSIONS: Our results open new insights regarding potentially acid-resistant proteins that could be added to dental products to prevent acidic dissolution of the teeth.

Surface properties of multilayered, acrylic resin artificial teeth after immersion in staining beverages.

OBJECTIVE: To evaluate the effect of staining beverages (coffee, orange juice, and red wine) on the Vickers hardness and surface roughness of the base (BL) and enamel (EL) layers of improved artificial teeth (Vivodent and Trilux). MATERIAL AND METHODS: Specimens (n=8) were stored in distilled water at 37°C for 24 h and then submitted to the tests. Afterwards, specimens were immersed in one of the staining solutions or distilled water (control) at 37°C, and the tests were also performed after 15 and 30 days of immersion. Data were analyzed using 3-way ANOVA and Tukey's test (α=0.05). RESULTS: Vivodent teeth exhibited a continuous decrease (p<0.0005) in hardness of both layers for up to 30 days of immersion in all solutions. For Trilux teeth, similar results were found for the EL (p<0.004), and the BL showed a decrease in hardness after 15 days of immersion (p<0.01). At the end of 30 days, this reduction was not observed for coffee and water (p>0.15), but red wine and orange juice continuously reduced hardness values (p<0.0004). Red wine caused the most significant hardness changes, followed by orange juice, coffee, and water (p<0.006). No significant differences in roughness were observed for both layers of the teeth during the immersion period, despite the beverage (p>0.06). CONCLUSIONS: Hardness of the two brands of acrylic teeth was reduced by all staining beverages, mainly for red wine. Roughness of both layers of the teeth was not affected by long-term immersion in the beverages.

Surface properties of multilayered, acrylic resin artificial teeth after immersion in staining beverages

AbstractObjective To evaluate the effect of staining beverages (coffee, orange juice, and red wine) on the Vickers hardness and surface roughness of the base (BL) and enamel (EL) layers of improved artificial teeth (Vivodent and Trilux).Material and Methods Specimens (n=8) were stored in distilled water at 37°C for 24 h and then submitted to the tests. Afterwards, specimens were immersed in one of the staining solutions or distilled water (control) at 37°C, and the tests were also performed after 15 and 30 days of immersion. Data were analyzed using 3-way ANOVA and Tukey’s test (α=0.05).Results Vivodent teeth exhibited a continuous decrease (p<0.0005) in hardness of both layers for up to 30 days of immersion in all solutions. For Trilux teeth, similar results were found for the EL (p<0.004), and the BL showed a decrease in hardness after 15 days of immersion (p<0.01). At the end of 30 days, this reduction was not observed for coffee and water (p>0.15), but red wine and orange juice continuously reduced hardness values (p<0.0004). Red wine caused the most significant hardness changes, followed by orange juice, coffee, and water (p<0.006). No significant differences in roughness were observed for both layers of the teeth during the immersion period, despite the beverage (p>0.06).Conclusions Hardness of the two brands of acrylic teeth was reduced by all staining beverages, mainly for red wine. Roughness of both layers of the teeth was not affected by long-term immersion in the beverages.

Effects of short-term immersion and brushing with different denture cleansers on the roughness, hardness, and color of two types of acrylic resin.

PURPOSE: To investigate the cumulative effects of brushing (B) or immersion (I), using different cleansing agents, on the surface roughness, hardness and color stability of a heat-polymerized denture resin, Lucitone 550 (L), and a hard chairside reline resin, Tokuyama Rebase Fast II (T). METHODS: A total of 316 specimens (10 x 2 mm) were fabricated. The specimens (n = 9) were divided into brushing or immersion groups according to the following agents: dentifrice/distilled water (D), 1% sodium hypochlorite (NaOCl), Corega Tabs (Pb), 1% chlorhexidine gluconate (Chx), and 0.2% peracetic acid (Ac). Brushing and immersion were tested independently. Assays were performed after 1, 3, 21, 45 and 90 brushing cycles or immersion of 10 seconds each. Data were evaluated statistically by repeated measures ANOVA. Tukey's honestly significant difference (HSD) post-hoc test was used to determine differences between means (α = 0.05). RESULTS: For L there was no statistically significant difference in roughness, except a significant decrease in roughness by brushing with D. T showed a significant effect on the roughness after 90 immersions with Ac. Hardness values decreased for L when specimens were immersed or brushed in NaOCl and Pb. The hardness of T decreased with increases in the repetitions (immersion or brushing), regardless of the cleaning method. Values of color stability for L resin showed significant color change after brushing with and immersion in Ac and Pb. Brushing with D exhibited a higher incidence of color change. For T there were no significant differences between cleaning agents and repetitions in immersion. A color change was noted after three brushings with the Ac, Chx, and D. Brushing with dentifrice decreased roughness of L. Immersion in or brushing with NaOCl and Pb decreased the hardness of L. For T, hardness decreased with increases in immersions or brushing. Color changes after the immersion in or brushing with cleaning agents were clinically acceptable according to National Bureau of Standards parameters for both resins.

In vitro evaluation of adherence of Candida albicans, Candida glabrata, and Streptococcus mutans to an acrylic resin modified by experimental coatings.

This study evaluated the effect of experimental coatings, containing zwitterion or hydrophilic monomers, on the adherence of Candida albicans, Candida glabrata, and Streptococcus mutans to an acrylic resin. Acrylic samples (smooth or rough surfaces) were left untreated (control) or coated with one of the following experimental coatings: 3-hydroxypropylmethacrylate (HP) or sulfobetaine methacrylate (S), at concentrations of 25, 30, or 35%. Half of the specimens were coated with saliva. The adhesion test was performed by incubating specimens in C. albicans, C. glabrata, and S. mutans suspensions at 37°C for 90 min. The number of adhered microorganisms was determined by metabolic activity (XTT) and by cell viability (CFU). All coated specimens exhibited lower absorbance and CFU values compared to control specimens. Saliva and roughness did not promote microorganism adherence. An XPS analysis confirmed the modification in the chemical composition of the coatings in the experimental samples. These experimental coatings significantly reduced the adherence of C. albicans, C. glabrata and S. mutans to acrylic resin.

Colour stability of relined dentures after chemical disinfection. A randomised clinical trial.

BACKGROUND: This randomised clinical study evaluated the effect of chemical disinfection with sodium perborate or chlorhexidine on the colour stability of a hard chairside reline resin during six months. METHODS: Hard chairside reline resin (Tokuyama Rebase Fast II) was used to reline complete dentures. After baseline colour measurements, the patients were randomly divided into 3 groups (n = 15) and allocation was concealed with the use of the BioStat program. The dentures were cleansed according to three methods: CG (control group)--brushing with coconut soap and soft toothbrush, PG (Perborate group)--brushing according to previous methods and disinfection with warmed sodium perborate solution (Corega Tabs) for 5 min, once a day for 6 months and ChxG (Chlorhexidine Group)--brushing according to CG and disinfection with chlorhexidine digluconate 2% for 5min once a day for 6 months. The data of ΔE*, ΔL*, Δa* and Δb* were analysed by 2-way repeated-measures ANOVAs and Tukey tests (α = 0.05). RESULTS: There were significant differences amongst groups for ΔL, Δa and Δb. The time had a significant effect on ΔE and ΔL, for all groups evaluated. CONCLUSION: Changes in some colour parameters (ΔL, Δa and Δb) of the reline resin Tokuyama Rebase were observed when the dentures were disinfected by perborate and chlorhexidine digluconate 2% solutions. The colour stability of was also influenced by time, regardless of disinfection or nondisinfection. CLINICAL IMPLICATIONS: Colour stability of the denture materials is one variable to be considered when choosing disinfection methods. The data in this study will be useful to clinicians when they are selecting disinfectant solutions for disinfection of relined denture.

Color stability of chemically activated reline resin after microwave disinfection: a 1-year clinical trial.

PURPOSE: To evaluate the effect of microwave disinfection on the color stability of a hard chairside reline resin after a 1-year service period. METHODS: 40 adult patients aged between 30-75 years, who required denture reline treatment, participated in this study. Tokuyama Rebase II was used to reline complete maxillary dentures. The edentulous subjects were randomly divided into two groups (n=20) and dentures were cleansed according to two methods: CG (control group) - brushing with coconut soap and soft toothbrush; DG (disinfection group) - brushing according to previous methods and microwave disinfection once a week for 3 minutes at 650W. Color parameters in L*a*b* were recorded by spectrophotometer immediately after the reline, at 7 and 15 days, 1, 3, 6 and 9 months and 1 year post-placement. Data were analyzed by two-way repeated-measures ANOVA and Tukey tests (alpha = 0.05). RESULTS: Color alteration values of DG were significantly lower than those of CG (P<0.05). Color changes observed after 15 days were greater than values obtained at 7 days recall (P<0.05). All color changes observed for the CG were considered noticeable (between 1.5 and 3.0 NBS). In DG, color change was slight (between 0.5 and 1.5 NBS). There were statistically significant differences between L* values obtained initially and after 3 months, between 15 days and 3 months and between 15 days and 1 year (P<0.05). No significant differences were observed between group and time for the parameters a* and b*.